Large Mining Tunnel Fan for Tunnel Excavation

Usage
The TDJ series low-noise tunnel fan is a dynamic and tunable two-stage impeller counter-rotating. Two special impellers equipped with imported SKF Swedish bearings directly drive two opposite impellers.

The TDJ series low-noise tunnel axial flow fan is also movable and can be calibrated for single-pole impeller rotation.

A single-stage impeller is directly driven by a special motor equipped with imported SKF Swedish bearings.

Tunnel construction ventilators are widely used in railway tunnels, highway tunnel water conservancy construction projects, ventilation, ventilation equipment for mines, power stations and other underground construction projects.

As the tunneling depth increases, different fan performances are obtained by adjusting the blade mounting angle, and the flow pressure is gradually increased, thereby reducing the operating cost of the fan. The fan is allowed to run in reverse wind, but the impeller must be started after the impeller is completely stationary.
The conveying medium is air, the dust content is <150mg/m3, the working temperature is -20~40°C, and the relative humidity is <95%.
For the construction requirements of explosion-proof engineering, the fan is designed and manufactured according to the requirements of explosion-proof technical conditions, and the explosion-proof standard dI.

This series of wind tunnel fan has a wide adaptability and long service life, and is an ideal replacement for ventilation equipment in tunnels, mines and related engineering fields.

The matching ventilation hose adopts high-strength cross-feeding industrial back-feeding. The maximum tensile strength of the material can reach 3000N/5cm2. It has the characteristics of waterproof, flame retardant, anti-static, heat-resistant and cold-resistant, anti-aging, anti-mildew, etc., and the friction resistance coefficient is lower than 0.015, under good construction management conditions, the average leak rate of 100 meters is between 1% and 1.3%.