electromagnetic flow meter
Other Products
electromagnetic flow meter
electromagnetic flow meter Description:
Xi'an Yunyi Instrument Co., Ltd
Battery-powered electromagnetic flow meter, built 3.6V / DC battery, can work for longer than three years. At the same time using a specially designed sensor excitation system with full digital signal processing, anti-interference ability characteristics. Battery-powered electromagnetic flowmeter converter using LCD backlight LED display, even in bright light or at night can be clearly read.
Like other electromagnetic flow meter in our company,theAutomatic bi-directional flow measurement can be achieved, on-site instantaneous measurement, forward, reverse cumulative total display, GSM data wireless remote, self-diagnostic troubleshooting tips, and other functions. And there is an intelligent and smart sub-body size can be selected according to the site.
It is the most stable domestic battery-powered electromagnetic flowmeter , as well as the highest accuracy, the most power and convenient .
electromagnetic flow meter Parameter:
| Nominal diameter： | DN3、6、10、15、20、25、32、40、50、65、80、100、150、200、250、300、350、400、450、500、600、700、800、900、1000、1200、1400、1600、1800、2000 |
| Maximum flow rate： | 15m/s |
| Accuracy： | 0.5%、0.2% |
| Standard： | JB/T9248-1999 |
| Nominal： |
4.0MPA(DN10-150) 1.6MPA(DN200-600) 1.0MPA(DN700-1200) 0.6MPA(DN1400-2000) Special requirementscanbe customed |
| Surrounding temperature： | sensor:-25℃～+60℃ converter:-10℃～+60℃ |
| Relitive humidity： | 5%-95% |
| Working Conditions: |
Fluid Maximum temperature：Compact 70℃ Separate: PTFE lining 150℃ Neoprene lining 80 ℃ Polyurethane Lining 70 ℃ |
| Fluid conductivity： | ≥5uS/cm |
Electrode forms and materials electromagnetic flow meter
Electrodes can be divided into standard, blade type, removable type and with a ground electrode.
| Electrode and the grounding electrode materials： | Molybdenum stainless steel, Hastelloy B, Hastelloy C, titanium, tantalum, platinum according to an alloy, stainless steel coated with tungsten carbide seven kinds. |
| Flange material： | carbon steel |
| Grounding Ring Material: | Stainless Steel |
| Door guard ring material: | stainless steel, carbon steel. |
| Housing protection: | IP65, IP68: only Separate neoprene and polyurethane lining sensor and does not include proof structure. |
| Explosion Standard: |
DN15-DN600 Compact Explosion: md II BT4 DN15-DN1600 separation-proof, sensor and transducer mounted on the respective danger zone md II BT4 DN15-DN1600 separation-proof, the sensor is installed in the corresponding danger zone converter installed in the safe zone: md II BT4 |
| Connection cable: | split between electromagnetic flowmeters, sensors and signal converter cable, the maximum cable length should be less than 100MM, the company provides 10M cable free with tables, and the gap to be ordered. |
| Converter performance: | Power supply DC power supply 11-40VD • C |
| Converter Display and programming operations: | four membrane keys can be set to select all the parameters, but also took over the operation or use of a PC (RS485, RS232) for converter set programming, high-resolution backlit LCD display, empty pipe detection self-diagnostic function. |
| Digital Communications: | RS485, RS232, MODBUS, REMOTE, with lightning protection. |
| Output signal: | Current output: two-way two-way, fully isolated 0-10mA / 4-20 mA; load resistance: 0-10 mA is 0-1.5K ohms, 4-20mA time is 0-750 ohms. |
| Frequency output: | forward and reverse flow output, output frequency limit can be set within the range of 1-5000 HZ. Transistor with optical ugly bidirectional output from the collector. External power is not greater than 35V, maximum collector current conduction is 250 mA. |
| Pulse output: | forward and reverse flow output, the output pulse limit up 5000cp / s. Pulse equivalent to 0.001L-1.0m3 / P. The pulse width is automatically set to 20ms or square wave. Transistor with optically isolated open collector output. External power is not greater than 35V, maximum collector current conduction is mA. |
| Flow indication output: | The meter can measure the flow rate of fluid flow positive and negative directions. And can determine the direction of fluid flow. When the provisions of the display output + 10V high forward flow, reverse fluid flow output of 0V low. |
| Alarm output: | transistor with two optically isolated open collector alarm output. External power is not greater than 35V, maximum collector current conduction is 250mA. Alarm status: fluid air traffic control, excitation break, flow gauge. |
| Damping time: |
between 0-100S binning options. |
Features electromagnetic flow meter:
1.Not affected by fluid density, viscosity, temperature, pressure and rate of change of electric, linear measurement principle to achieve high accuracy measurements;
2.Unimpeded flow measuring tube fittings, pressure loss, straight pipe requirements low;
3.Nominal diameter DN6-DN2000 cover a wide range, lining and electrodes have a wide selection to meet a variety of conductive fluid measurement requirements;
4.The converter with programmable low-frequency square wave excitation frequency and improve the stability of the flow measurement, low power consumption;
5.The converter uses 16-bit embedded microprocessors, digital processing, computing speed, anti-interference ability, reliable measurement, high accuracy, flow measurement range of up to 1500: 1;
6. High-resolution backlit LCD display, easy to use, simple to operate, easy to understand;
7.With RS485 or RS232O digital communication signal output;
8.Has a conductivity measurement function, you can determine whether the sensor is empty tube, with a self-test and self-diagnostic function;
9.Using SMD devices and surface mount (SMT) technology, circuit reliability;
10.Can be used for the corresponding proof occasions.
Appications:
Battery-powered electromagnetic flow meter, used to measure the conductive fluid in closed conduits pulp, sulfuric acid volume flow. Battery-powered electromagnetic flow meter is widely used in petrochemical, iron and steel metallurgy, paper and other industries.
Product type and composition electromagnetic flow meter
Battery-powered electromagnetic flowmeter consists of two parts electromagnetic flow converters and electromagnetic flow sensors, separation also need a special type of double-shielded cable converters and sensors. The battery-powered electromagnetic flow meter into a size and separation of two structural forms. Can be used to sp
| Industry Category | Measurement-Analysis-Instruments/Flow-Measuring-Instruments/Flow-Meters |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | |
| Stock: | |
| Origin: |
